AUDAC Dante® Ready Multi-function Mixer Amplifier

$1,654.15 ex GST

AUDAC Multi-function Mixer Amplifier

• All-in-one audio solution – 2 x 80W @ 4 Ohm – 160W @ 70/100V

Available on backorder


SKU MFA216 Category

Description

The AUDAC Dante® Ready Multi-function Mixer Amplifier is designed as a two-channel amplifier using class D amplifier technology.

It can be used for powering low impedance stereo systems with a maximum power of 2 x 80 Watt, while bridging to a constant voltage (100V and 70V) is possible with a maximum output power of 160 Watt.

Integrated SourceCon™

The integrated SourceCon™ module* slot allows the implementation of any available compatible module, offering a true all-in-one solution. Typical applications are the implementation of an audio streaming module or internet radio module. Additionally, a stereo line input allows connection for any kind of external audio sources.

Spec Overview

A balanced mic/line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V).

• Priority switch overrides the background music when enabled and compatibility with line-level sources (e.g. voice file players) is guaranteed by wide gain adjustment (0 dB ~ +50 dB).

• Gain adjustment controls both the sensitivity of the line inputs on the rear as on the front. Thanks to the 2.8” TFT display and the push rotary dial on its front, an unmatched user experience is achieved.

A line out connection at the back of the device is making the device even more versatile. This line out can be used as a preamp output, where the input and volume are the same as the internal amplifier or as a separate secondary stereo zone output, where both zones (inputs, volume control, and many more..) can be operated completely independently of each other.

A priority mute contact on the back of the device mutes the music at the presence of a contact closure between both terminals. Priority enabled on mic-in overrides the muting, allowing emergency announcements or voice messages.

RS Control

The MFA series are both RS232, RS485 and TCP/IP controllable allowing implementation with home & industrial automation systems and peripheral devices. Using the freely available AUDAC Touch™ 2 application, control and configuration can be done from any portable or non-portable device on any location and at any time.

Desktop installation or mounting in an equipment rack using the MBS1xx series mounting adapters is possible. The half 19” rackspace enclosure allows single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack.

When installed the (optional) ANI44XT Dante™ audio network interface, music from the installed SourceCon™ module or connected line input signal can be shared throughout your Dante™ audio network to other compatible devices or amplifiers. Using Dante™, you can even play priority messages with near-zero latency (100ms) to the audience.

How about this: Modular Audio system

For More info Audac Belgium

NEED SUPPORT?
DISCUSS A PROJECT
SHOP NOW
+61 2 9624 7977
avico@avico.com.au

Unit 1, 45a Eastern Creek Drive
Eastern Creek NSW 2766
Australia

Your Satisfaction Guarantee from us!

Find out more about our complimentary 30 day post installation service, where we ensure your site is operating in the way you expected it to based on what we had talked about.

We are super proud of it!

Sign up to our Newsletter