KEY DIGITAL HDMI HDBaseT Extender & Audio De-Embed

$882.55 ex GST

KEY DIGITAL 4K POH/HDBaseT/HDMI with Audio De-Embedder Extenders (TX/RX KIT)

1 in stock (can be backordered)


SKU KDX422POA Category

Description

KEY DIGITAL HDMI HDBaseT Extender & Audio De-Embed

  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • Power Over HDBaseT: Features power extension from Tx to Rx with Power Over HDBaseT. The Rx unit does not require a power supply
  • Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog L/R Balanced/Unbalanced and Digital Coaxial Audio (PCM) audio outputs to enable external audio connectivity with audio distribution systems and amplifiers
  • Signal Extension:
    • Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using CAT6A cabling
    • Up to 250 ft. @ 1080p / 1920×1200 using CAT6A cabling
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
  • 4K/UHD Resolution: Supports signals up to 4096×2160 60Hz [4:2:0] 8bit, 4096×2160 30Hz [4:2:2] 12bit, and 4096×2160 30Hz [4:4:4] 8bit
  • Deep Colour Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
  • 3D: Support for standard 3D stereoscopic signal formats
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
  • Low Profile: Super slim chassis design
  • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to and from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to and from the Tx and Rx unit on Phoenix connector

For great 4K HDMI Cables, please have a look at the DKH401UP

For more great products and information visit Key Digital

NEED SUPPORT?
DISCUSS A PROJECT
SHOP NOW
+61 2 9624 7977
avico@avico.com.au

Unit 1, 45a Eastern Creek Drive
Eastern Creek NSW 2766
Australia

Your Satisfaction Guarantee from us!

Find out more about our complimentary 30 day post installation service, where we ensure your site is operating in the way you expected it to based on what we had talked about.

We are super proud of it!

Sign up to our Newsletter