Key Digital – HDMI Over IP Receiver Unit
  1. Home
  2. Key Digital – HDMI Over IP Receiver Unit

Key Digital – HDMI Over IP Receiver Unit

$641.85 ex GST

HDMI over IP with POE (Rx) Receiver

• 100M RANGE @ 1080p

• Redundant Power Connection

4 in stock (can be backordered)

SKU KDIP1080RX Category Tags , , , ,

Description

Key Digital – HDMI Over IP Receiver Unit

Connectivity: Can be connected through a network IP switch or point-to-point

H.264 Compression: Ideal standard for large video distribution applications

Low-bandwidth System: Supports managed 100BaseT or Gigabit network switches

Custom System: Add Tx and Rx extenders to an existing system to expand HDMI over IP up to 1024 Tx units and unlimited amount of Rx units

Power Over Ethernet: Carry power to Tx and Rx units with a Power Over Ethernet enabled Smart Managed Switch

HDMI Pass-through: Tx unit support HDMI Pass-through to receive video or extract audio on the transmit side

Alternative Extension Methods: Enabled by low-bandwidth data streaming technology
Wifi Extender: Up to 35m.

IP over Coaxial: Up to 300m

Resolution Support: Supports up to 1080p@60 (2.25Gbps) and compatible with DVI1.0/HDMI/HDCP1.x

  • Audio Format: Supports 2ch PCM at 44.1/48kHz
  • Data Stream Bandwidth: < 15Mbps.
  • Signal Extension: Up to 150m @ 1080p@60 (2.25Gbps) using CAT5e/6 UTP/ STP cable
  • Web Control Interface: Reduces installation time and provides basic video setup.
  • Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake
  • EDID: EDID libraries readily available to provide the best setup per source
  • Deep Colour Support: Up to 12 bits/colour
  • TMDS re-clocking: Support for long HDMI runs using Key Digital HDMI cables
  • Licensing: Fully licensed and compatible with all HDMI and HDCP technologies
  • Control System Support: Key Digital app ready. Key Digital Management Software Pro (KDMS‚ Pro) ready, Compass Control Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.
  • Source/Display Control: Integrate with KD-CX800 to add 3 IR, RS-232 or Trigger ports
  • Key Digital App Ready: Can be controlled over TCP/IP via Key Digital App

Control App Stabilization: One KD-CX800 or KD-MC1000 recommended to act as a gateway and increase reliability from KD-App control

For more information in the key digital range of products click here

Related products